1: ELMconfig special – speed set to 500kbit – FoCCCus FF2
2: MS-CAN support (MS-CAN / HS-CAN switch)
3: HS-CAN mode can reach 500000 baud (500kBit) rate(* Constant speed set to 500000 baud (500 kbit))
Note: The Driver is for 32 /64 bite Windows.
We will send you software download link (there is no CD, it is easy damaged during shipping, hope your understanding)
1. Close Firewall and Anti-virus software before running software, they are all cracked software. may be recognized as virus when they are not. Don't worry.
2. Intall software, also need install all the USB drivers from USB folder , otherwise, the laptop will not find the cable.
1. With best PIC18F25K80 Chip
2. Add functionality for Ford cars, Even support hidden function for ford Focus Mondeo Kuga.
(Hidden function Support car list: 2006-2016 classical for Focus , 2012-2015 new for Focus , 2013-2015 Kuga)
3. Powerful Softwares Compatible: FORScan, Elmconfig, FF2 and FoCCCus, Scanmaster plus more
4. Special Design with Switch : connect different CAN buses , such as MS CAN bus and HS CAN bus
5. Drivers and instructions included,Easy to install.
6. The most stable Hardware V1.5 , Support most OBD2 Protocols
7. Supported Langauges:
—–When starting HS function, it supports 12 Languages:
—–When starting MS CAN function, it supports Language: English & Russian.
8. Supported cars:
Especially for Ford, for Mazda, for Lincoln, for Mercury vehicles And other OBD2/EOBD universal car models.
9. Supported protocols:
for FORD HS CAN
for FORD MS CAN
SAE J1850 PWM(41.6Kbaud)
SAE J1850 VPW(10.4Kbaud)
ISO9141-2(5 baud init,10.4Kbaud)
ISO14230-4 KWP(5 baud init,10.4 Kbaud)
ISO14230-4 KWP(fast init,10.4 Kbaud)
ISO15765-4 CAN(11bit ID,500 Kbaud)
ISO15765-4 CAN(29bit ID,500 Kbaud)
ISO15765-4 CAN(11bit ID,250 Kbaud)
Support FORD models open hidden function Focus Mondeo Kuga
MS-CAN support via toggle switch(MS-CAN / HS-CAN)
ELM327 USB has full support to Ford specific diagnostic protocol MS-CAN.
Majority of modern Ford modules are accessible only through this protocol.
Support FORD models open hidden function.
Besides added functionality for Ford, this device works as normal OBD2/EOBD code reader on most supported vehicles.
* read/erase fault codes from most modules, including OBD2/EOBD
* access modules on both HS-CAN and MS-CAN mode
* read vehicle configuration
* actuator tests
* Live Data
* injector coding
* service procedures
* force DPF regeneration
ELM327 USB V1.5 OBD2 you will be able to:
•Read and clear diagnostic trouble codes
•Air Flow Rate
•display and read
•Intake Air Temperature
•Long Term Fuel Trim
•Short Term Fuel Trim
•Fuel System status
•and so much more!
ELM327 USB Switch Support Car List:
For LAND ROVER
AND SO MUCH MORE!
Please note that many for Ford and for Mazda models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular HS CAN bus. In contrast to HS CAN bus, MS CAN bus is not supported by the stock ELM327, because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins. This ELM327 has been modified to allow it to implement the MS CAN bus.
ELM327 supports HS CAN from the stock, because for Ford HS CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11.
Switch position one: HS CAN – Occupies pins 6 and 14
Switch position two: MS CAN – Occupies pins 3 and 11
ELM327 USB Switch Packing List:
1*ELM327 USB Switch